• Storage space on myTikee

  What counts in your storage space on myTikee? All the images on your myTikee account are counted in your storage space. Your image pairs are counted as a single image. Points of view with right or left images are counted in addition to panoramic images. Blurred images (RGPD blurring and mask blurring) are counted in addition to the original images without blurring. If you have duplicated a point of view, the images are only counted once. The videos generated by the Timelapse Builder and pPopular

• Advanced sharing features on myTikee

  How to use the sharing features on myTikee ? By clicking on the on the cogwheel at the top right of your Point of View or Portfolio, you will find a "Share" button below the displayed image. Sharing Cogwheel You'll have access to a variety of different sharing options, including : direct sharing of the preview page direct sharing of the photo gallery or timelapse videosPopular

• Images saved on SD card

  A micro SD card is required to use your Tikee. It can't take pictures without a micro SD card. This article details the type of SD card compatible with your Tikee. How does storing images on the micro SD card work? All the images taken by the Tikee are saved on the micro SD card. When settPopular

• View your images on myTikee

  How can I see the photos and videos I’m shooting? Is live-view available? The images are uploaded by the Tikee at defined intervals. The settings allow you to adjust this interval as well as the number of images for each upload. With each upload, the Tikee will log in, and send its information and available photos. The information and photos that you can see for your point of view are those that the Tikee uploaded the last time it connected. There is therefore a time delay between the imaSome readers

• Left / right images stitching

  The merging of the right/left images is not working properly, there is a blur in the center of the image Check that no obstacle or moving object passes within 5 meters of the Tikee during the first merges (about 100 images may be needed to calculate it). The image merging is optimized based on the first images received (between 20 and 100 images depending on the scene). It is thus recommended: tSome readers

• FTP / SFTP transfer from myTikee

  How does FTP transfer work? Your images can be automatically transferred to your FTP or SFTP server. You can connect up to 5 different FTP / SFTP servers to your myTikee account. You can then choose on which server each of your Tikee sends its pictures. The transfer includes 3 different photos for each capture: left photo, right pSome readers

• Blocked image upload

  Your Tikee is not/no longer uploading any photos Check the battery level of your Tikee camera on the myTikee cloud platform. Below 60% battery, your Tikee no longer uploads photos although it continues to take photos while storing them on the microSD card. Once the battery level is above 70%, the upload will resume. If you are using the 4G network, check your 4G plan status (remaining data plan, etc.). Make sure that the Wi-Fi or 4G throughput allows for photo upload (throughput 20Few readers

• Recording sequences

  Sequence types Sequences with Tikee 3 PRO Tikee 3 PRO sequences Sequences with Tikee 3 Tikee 3 PRO sequences Suggested settings for long term sequence Settings such as the daily time range, activity days per week and the shooting interval have consequences on the autonomy of the camera and the data consumptFew readers

• Timelapse Builder

  How does the Timelapse Builder work? From the myTikee cloud platform, the Timelapse Builder allows you to create a professional-quality timelapse in just a few steps using advanced image processing and photo selection algorithms specifically developed by Enlaps. You can create yoFew readers

• Points of view merging

  How do I group points of view together? This action may sometimes be necessary (e.g., for starting a new sequence from the same point of view, replacing a camera following a malfunction, etc.). To do this, simply contact us via this form and select "After Sales Service". Please provide the relevant points of view names and numbers (each point of view number can be found in the URL when you are on the edit page). Please note that the image resolutions of theFew readers

• Distortion of the horizon line due to the wide angle

  How can I correct the horizon if it is distorted? You will find information here. As with any other wide-angle lens, a projection is distorted. However, it is corrected once the photos are sent to the cloud platform during the image merging process. When the camera is positioned on a horizontal plane, the distortion is limited (you should avoid high and low-angle shots).Few readers

• Automatic timelapse creation

  How are timelapses created? The timelapses are created in the myTikee cloud platform from the images sent by the Tikees, with a minimum of 100 images, at a speed of 25 fps. It is possible to create several timelapse points of view from the same set of images, for example by modifying the time scale, using advanced filtering (for a long-term timelapse), adding a tracking shot effect thanks to the Pan & Zoom feature, etc.Few readers

• Iframe sharing

  How do I customize iframe sharing? The customization of iframe links is available. We recommend the following guide to help you: https://enlaps.io/how-to-customize-the-iframe-of-your-timelapse-project/?lang=enFew readers

• Third party software images processing

  Is it possible to use another photo/video editing software or do I have to use the web application? You can use our cloud platform myTikee or upload your photos and then use a third-party software.Few readers

• Using one lens

  Is it possible to use only one of the lenses to create the shooting sequence? If the photos were sent automatically by the camera: It is possible to create a new point of view with the right or left images directly from an existing point of view by clicking on the blue Duplicate button (requires a myTikee Storytelling subscription). If the photos are downloaded from the SD card: It is possible to retrieve the left and right unmerged images. You can then upload solely the images from the siFew readers

• Pan & Zoom

  How does the Pan & Zoom work on myTikee? The Pan & Zoom lets you add a tracking effect and / or zoom in your timelapse video. When you activate the Pan & Zoom, two frames appear: Start and End. You can set the position and size of these frames. The timelapse video will then move in the panoramic image from the ‘Start’ area to get to the ‘End’ area.Few readers

• Tikee Dashboard

  How to read the Tikee Dashboard ? Power mode: indicates the operating status of your Tikee Battery: indicates the percentage of battery left Last image received: indicates the date of the last image received Telecom: indicates the network throughput (calculation based on the time it takes to upload images) SD card: indicates the available storage space Last connection: indicates the date ofFew readers

• Mask blurring

  The blur mask allows you to blur fixed parts of the scene by adding a mask on your images and your timelapse video. Once the blur mask is applied, you'll have 2 points of view on your account: one with the blurred images and one with the unblurred images. How do I use masking on myTikee?Few readers

• Edit your recording from myTikee

  What settings can I edit remotely for long-term sequences? Once your long-term recording sequence has been set up and launched, you can edit the following elements remotely, from the myTikee cloud platform: -the end date of the shooting the shooting time slot the days of the week when shooting is activated the interval between shots recording rules on the SD card sequence creation and deletion These modifications will be taken into account at the next connection of the Tikee camerFew readers

• DNG / RAW images

  How to generate a timelapse video from DNG images with Tikee? Here is an article explaining how to use the DNG images with Tikee. How to get RAW images with your Tikee? This is only possible in long-term sequence and by choosing to store images on the microSD card exclusively. Due to their size, these RAW (DNG) files cannot be uploaded to the cloud. Please note that DNG/RAW files cannot be processFew readers

• GDPR Blurring

  What is GDPR blurring? A person blurring option is available with the myTikee Reporting and myTikee Unlimited subscriptions. Recognizable people are automatically blurred in the images sent by your Tikee. Once the feature is activated, a new viewpoint will be created with the suffix iablurring where the blurred images will arrive. So you'll have 2 points of view on your myTikee account, one withFew readers

• Sunrise / sunset

  How to use the sunrise and sunset feature ?Few readers

• Temporal filters

  How to use the temporal filters on myTikee ?Few readers

• Point of View duplication

  How to duplicate a point on view on myTikee ? Click on the duplicate button : Duplicate the point of view which you can find in the interaction submenu: Available features A window will open : Duplication features (https://storFew readers

• Email alerts

  In which situations are email alerts sent? Email alerts warn of different situations that can be encountered on a Tikee: Loss of internet connection to the Tikee No status has been received within the last 24 hours No status has been received within the last three days Battery level of your Tikee The battery charge is low (less than 30%) The battery charge is veFew readers

• Delete your myTikee account

  How do you delete your account from the myTikee cloud platform? Go to your profile on myTikee Click on "Delete my profile" at the bottom of the page. (httpsFew readers

• Manual upload of images on myTikee

  How does the manual upload of images work on myTikee? On myTikee, you can upload images directly from your computer. Manually uploading images can be used to: Create a point of view for a sequence without photo upload by the Tikee: you can upload the images saved on your Tikee's micro SD card to myTikee a posteriori, in a new point of view (when usingFew readers

• Portfolio

  What is a Portfolio? A Portfolio brings together all the photos taken by your Tikee camera by organizing and grouping them. You can navigate between several cameras on a virtual map in each of your Portfolios thanks to the geolocation of Tikee cameras. In your viewsfeed, you'll find the best content every day, so you can share it easily. Each Portfolio can be share thanks to a private sharing link and an iframe of the page. You can also use the ControlFew readers

• Magic Fade

  How to create a Magic Fade video.Few readers

• Control Room

  What is the Control Room view in your Portfolio? The Control room is a dashboard of all the Points of view in your Portfolio. It is automatically refreshed every 5 minutes to always display the last image sent by your Tikee for each Point of view. The date and time of shooting as well as the name of the Viewpoint are displayed on each image. (https://storage.crisp.chat/userFew readers

• Artificial Intelligence filters

  How to use the Artificial Intelligence filters on myTikee?Few readers

• Secure link sharing

  What is secure link sharing? Sharing by secure links allows you give password-protected access to the resources in your myTikee account on the basis of a defined list of users, identified by their email. The items that can be shared via this feature are as follows: Point of View Portfolio AI Dashboard Timelapse Builder Export This sharing provides viewing access to the various assets, not editing. Users to whom you send a secure sharing link are not required to have an account on tFew readers

• AI Dashboard

  What is the AI Dashboard on myTikee? The AI Dashboard is developed to help professionals analyze data with indicators related to productivity, safety and monitoring of their project. It contains a compilation of data from one point of view in a dashboard. 3 indicators are available on the AI Dashboard: Number of Detections: available in 3 categories; People, Civil Vehicles, Construction Vehicles Safety Score: a measure defined in the dashboard settings ActFew readers